We are technical WLAN Access Point manufacturer, supplier, exporter and factory in Taiwan. We can manufacture according to our clients' requirements. We ensure high quality products and competitive price and prompt delivery for you. More models of our products wanted, please contact us now!
-
APE-5005MM21 - Outdoor Bridge : WLAN Access Point
Formosa AAP-5005MM21 Wireless MIMO Bridge provides reliable and predictable Wireless Bridge Connection or Wi-Fi Coverage.
With these wireless access points you can:
Augment throughput for high-bandwidth wireless applications
Protect your investment in wireless networking
Increase network reliability for high bandwidth applications
Data rates of 300 Mbps
Multiple input, multiple output technology for enhanced reliability
5GHz radio module
Specification
Hardware
Memory: 8MB Flash + 32MB SDRAM
LAN: 2 x 10/100BaseT RJ-45 with Auto-MDIX
Power Over Ethernet (POE): Yes (802.3af)
PoE Out: 12V PTE
Enclosure: Metal and Plastic PC Case, IP 67 Verified
Default Button: Yes
LED: Status / Power / RSSI / LAN
Ground: Yes
Ethernet Lighting Protector: Integrated inside PoE Injector
Power Requirements: 802.3af PoE 48Vdc @0.5A / 100~240 Vac, 50/60 Hz
Radio
Wireless: OFDM
Output Power: 26dBm@6Mbps / 21dBm@54Mbps; 26dBm@HT20 / 25dBm@HT40
Sensitivity:
-90dBm@11Mbps / -76dBm@54Mbps
-70dBm@HT20 / -66dBm@HT40
Antenna: Build-in 2x2 21 dBi
Feature
Operating Mode: AP, Bridge, CPE
Channel Bandwidth: 20MHz, 40MHz
Data Bandwidth Control: Yes
Output Power Management: Yes (Full, Half, Quarter, Eighth, Min.)
Max. Client Setting: Yes
RF Scheduling: Yes (Control Radio on/off)
Spanning Tree: Yes (802.1d)
RTS Threshold Setting: Yes (0-2,346)
Fragmentation Setting: Yes (256-2,346)
Beacon Interval Setting: Yes (20-1,000)
DTIM Interval Setting: Yes (1-255)
Security
MAC Control: Yes
WEP Encryption: 64, 128, 152-bit
WPA / WPA2: Yes
Wireless Isolatio: Yes
Hidden SSID: Yes
Firewall: Yes
VPN: VPN Pass-through (IPsec, L2TP, PPTP)
Management
Web Base Management: Yes
Console: Yes
SNMP V.2: Private MIB, 802.11 MIB
Support Time Server: Yes
Support Log Server: Yes
Physical
Operating Temperature: -20 ~ 70C
Operating Humidity: 10 ~ 95% RH
Weight: 2.9 Kg
Dimension: 335 x 335 x 81 mm -
APE-5005MM14 - Wifi Bridge : WLAN Access Point
Formosa AAP-5005MM14 Wireless MIMO Bridge provides reliable and predictable Wireless Bridge Connection or Wi-Fi Coverage.
With these wireless access points you can:
Augment throughput for high-bandwidth wireless applications
Protect your investment in wireless networking
Increase network reliability for high bandwidth applications
Data rates of 300 Mbps
Multiple input, multiple output technology for enhanced reliability
5GHz radio module
Specification
Hardware
Memory: 8MB Flash + 32MB SDRAM
LAN: 2 x 10/100BaseT RJ-45 with Auto-MDIX
Power Over Ethernet (POE): Yes (15-18V PTE)
PoE Out: 12V PTE
Enclosure: Plastic PC Case, IP 65 Verified
Default Button: Yes
LED: Power/Wireless/LAN
Ground: Yes
Power Requirements: 15V PoE
Radio
Wireless: OFDM
Output Power: 26dBm@6Mbps / 21dBm@54Mbps; 26dBm@HT20 / 25dBm@HT40
Sensitivity:
-90dBm@11Mbps / -76dBm@54Mbps
-73dBm@HT20 / -66dBm@HT40
Antenna: Build-in 14-16 dBi
Feature
Operating Mode: AP, Bridge, CPE
Channel Bandwidth: 20MHz, 40MHz
Data Bandwidth Control: Yes
Output Power Management: Yes (Full, Half, Quarter, Eighth, Min.)
Max. Client Setting: Yes
RF Scheduling: Yes (Control Radio on/off)
Spanning Tree: Yes (802.1d)
RTS Threshold Setting: Yes (0-2,346)
Fragmentation Setting: Yes (256-2,346)
Beacon Interval Setting: Yes (20-1,000)
DTIM Interval Setting: Yes (1-255)
Security
MAC Control: Yes
WEP Encryption: 64, 128, 152-bit
WPA / WPA2: Yes
Wireless Isolatio: Yes
Hidden SSID: Yes
Firewall: Yes
VPN: VPN Pass-through (IPsec, L2TP, PPTP)
Management
Web Base Management: Yes
Console: Yes
SNMP V.2: Private MIB, 802.11 MIB
Support Time Server: Yes
Support Log Server: Yes
Physical
Operating Temperature: -20 ~ 70C
Operating Humidity: 10 ~ 95% RH
Weight: 0.6 Kg
Dimension: 111 x 255 x 48 mm -
APE-2405MM8/M - Wlan Bridges : WLAN Access Point
Formosa AAP-2405MM Wireless MIMO Bridge provides reliable and predictable Wireless Bridge Connection or Wi-Fi Coverage.
With these wireless access points you can:
Augment throughput for high-bandwidth wireless applications
Protect your investment in wireless networking
Increase network reliability for high bandwidth applications
Data rates of 300 Mbps
Multiple input, multiple output technology for enhanced reliability
2.4GHz radio module
Specification
Hardware
Memory: 8MB Flash + 32MB SDRAM
LAN: 1 x 10/100BaseT RJ-45 with Auto-MDIX
Power Over Ethernet (POE): Yes
Enclosure: Plastic PC Case, IP 65
Default Button: Yes
LED: 4 LEDs, Status/Power/Wireless/LAN
Power Requirements: 12V@1A
Radio
Wireless: OFDM
Output Power: 27dBm@11Mbps / 26dBm@54Mbps / 23 dBm@HT20, HT40
Sensitivity:
-90dBm@11Mbps / -76dBm@54Mbps
-73dBm@HT20 / -70dBm@HT40
Antenna: Build-in 8 dBi + N Connector (Switchable by Software)
Feature
Operating Mode: AP, Bridge, CPE
Channel Bandwidth: 20MHz, 40MHz
Data Bandwidth Control: Yes
Output Power Management: Yes (Full, Half, Quarter, Eighth, Min.)
Max. Client Setting: Yes
RF Scheduling: Yes (Control Radio on/off)
Spanning Tree: Yes (802.1d)
RTS Threshold Setting: Yes (0-2,346)
Fragmentation Setting: Yes (256-2,346)
Beacon Interval Setting: Yes (20-1,000)
DTIM Interval Setting: Yes (1-255)
Security
MAC Control: Yes
WEP Encryption: 64, 128, 152-bit
WPA / WPA2: Yes
Wireless Isolatio: Yes
Hidden SSID: Yes
Firewall: Yes
VPN: VPN Pass-through (IPsec, L2TP, PPTP)
Management
Web Base Management: Yes
Console: Yes
SNMP V.2: Private MIB, 802.11 MIB
Support Time Server: Yes
Support Log Server: Yes
Physical
Operating Temperature: -20 ~ 70C
Operating Humidity: 10 ~ 95% RH
Weight: 0.4 Kg
Dimension: 165mm(L)×60mm(W) ×34mm(H)
H PlaneE Plane
-
AAP-2405MM - Wlan Bridge : WLAN Access Point
Formosa AAP-2405MM Wireless MIMO Bridge provides reliable and predictable Wireless Bridge Connection or Wi-Fi Coverage.
With these wireless access points you can:
Augment throughput for high-bandwidth wireless applications
Protect your investment in wireless networking
Increase network reliability for high bandwidth applications
Data rates of 300 Mbps
Multiple input, multiple output technology for enhanced reliability
2.4GHz radio module
Specification
Hardware
Memory: 8MB Flash + 32MB SDRAM
LAN: 1 x 10/100BaseT RJ-45 with Auto-MDIX
Power Over Ethernet (POE): Yes (802.3af)
Enclosure: Metal and Plastic PC Case, IP 67 Verified
Default Button: Yes
LED: 4 LEDs, Status/Power/Wireless/LAN
Ground: Yes
Ethernet Lighting Protector: Integrated inside PoE Injector
Power Requirements: 802.3af PoE 48Vdc @0.5A / 100~240 Vac, 50/60 Hz
Radio
Wireless: OFDM / CCK
Output Power: 27dBm@11Mbps / 26dBm@54Mbps / 23 dBm@HT20, HT40
Sensitivity:
-90dBm@11Mbps / -76dBm@54Mbps
-73dBm@HT20 / -70dBm@HT40
Antenna: Build-in 19 dBi + N Connector (Switchable)
Feature
Operating Mode: AP, Bridge, CPE
Channel Bandwidth: 20MHz, 40MHz
Data Bandwidth Control: Yes
Output Power Management: Yes (Full, Half, Quarter, Eighth, Min.)
Max. Client Setting: Yes
RF Scheduling: Yes (Control Radio on/off)
Spanning Tree: Yes (802.1d)
RTS Threshold Setting: Yes (0-2,346)
Fragmentation Setting: Yes (256-2,346)
Beacon Interval Setting: Yes (20-1,000)
DTIM Interval Setting: Yes (1-255)
Security
MAC Control: Yes
WEP Encryption: 64, 128, 152-bit
WPA / WPA2: Yes
Wireless Isolatio: Yes
Hidden SSID: Yes
Firewall: Yes
VPN: VPN Pass-through (IPsec, L2TP, PPTP)
Management
Web Base Management: Yes
Console: Yes
SNMP V.2: Private MIB, 802.11 MIB
Support Time Server: Yes
Support Log Server: Yes
Physical
Operating Temperature: -20 ~ 80C
Operating Humidity: 10 ~ 95% RH
Weight: 2.9Kg
Dimension: 335 x 335 x 81 mm -
AAP-2410M-3G - Outdoor Wireless Access Point : WLAN Access Point
Features
˙Support advanced 1 x 1 Technology with up to 150Mbps downstream and upstream
˙Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
˙Low Noise Amplifier(LNA) support
˙Support 20MHz and 40 MHz bandwidth
˙Operation mode: Gateway, Bridge, Wireless ISP
˙Wireless mode: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙RF output power adjustable
˙Virtual DMZ, Port Forwarding
˙Dynamic DNS
˙TCP/UDP/ICMP/ARP protocol stack
˙Firewall, URL/IP/Port/MAC filtering
˙Wireless users access control
˙Multiple SSID
˙NTP client
˙Wireless security - 64/128bit WEP, WPA TKIP, WPA2 AES, 802.1x
˙Support PPPoE, VPN pass-through(PPTP and L2TP)
˙QoS enhancement - WMM
˙WPS
˙Support 3G connection
Spectifications
Standard: IEEE 802.11b/g/n
Interface:
1 WAN + Build-in 3G module
1 LAN 10/100Mbps port
Operation Mode: Gateway/Bridge/Wireless ISP
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 72Mbps
802.11n(40MHz): up to 150Mbps
Access Protocol: CSMA/CA
Support 3G Standard: UMTS/ HSPDA / HSPA/ CDMA
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
RF Output Power(Typical):
802.11b: up to 29 ± 1 dBm
802.11g: up to 25 ± 1 dBm
802.11n: up to 24 ± 1 dBm
Sensitivity:
-93dBm @ 802.11b
-88dBm @ 802.11g
-87dBm @ 802.11n
Antenna:
One 9dBi directional antenna
One PIFA antenna
Dimension (mm): 225(L) x 77(W) x 59(H)
Wireless Mode: AP/Client/WDS/AP+WDS
Operation Temperature: -20°C ~ 70°Cambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing)
Connector:
One RJ-45 WAN port
One RJ-45 LAN port
Reset to default button
Power requirement: 12V DC -
AAP-I2405 - 802.11 b Access Point : WLAN Access Point
Features
˙IEEE 802.11b/g compliant with 54Mbps high-speed data rate
˙Wireless modes: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙TCP protocol stack
˙Wireless users access control
˙Wireless security - 64/128bit WEP,WPA/WPA2, 802.1x and 802.11i, WPS
˙Wireless site survey
˙Universal Plug and Play, no complicated installation
necessary
˙Quick and easy setup with Web-based management utility
˙Replaceable antenna allows user to replace higher gain antenna
Spectifications
Standard: IEEE 802.11b/g
Frequency Band: 2.400GHz ~ 2.4835GHz
Radio type: IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK)/IEEE 802.11b: DSSS(CCK/DQPSK/DBPSK)
Data Rate: 802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back; 802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
Media Access Control: CSMA/CA
Wireless Mode: AP/Client/WDS/AP+WDS
Security: 64/128bit WEP/WPA(TKIP with IEEE 802.1x)/WPA2(AES with IEEE 802.1x)
RF Output Power(Typical): 802.11b: up to 17 ± 1 dBm/802.11g: up to 14 ± 1 dBm
Sensitivity: -96dBm @ 11Mbps/-89dBm @ 54Mbps
Antenna: One detachable 2dBi antenna
Dimension (mm): 165(L) x 118(W) x 27(H)
Weight: 245g
Operation Temperature: 0°C ~ 50°C ambient temperature
Storage Temperature: -10°C ~ 70°C ambient temperature
Humidity: 10% ~ 90% (Non-condensing)
Connector: One antenna connector/One RJ-45 LAN port/Reset to default button
Power requirement: DC 9V/1A -
AAP-I2410 - 802.11 g Access Point : WLAN Access Point
Features
˙802.11b/g compliant with 54Mbps high-speed data rate
˙Operation modes: Gateway, Bridge, Wireless ISP
˙Wireless modes: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙Four Ethernet ports for broadband sharing
˙Virtual DMZ, Port Forwarding
˙Dynamic DNS
˙TCP/UDP/ICMP/ARP protocol stack
˙Firewall, URL/IP/Port/MAC filtering
˙Wireless users access control
˙Wireless security –64/128bit WEP, WPA/WPA2, 802.1x and 802.11i
Spectifications
Standard: IEEE 802.11b/g
Frequency Band: 2.400GHz ~ 2.484GHz
Radio type:
IEEE 802.11b: DSSS(CCK/DQPSK/DBPSK)
IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK)
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
Access Protocol: CSMA/CA
Wireless Mode:AP/Client/WDS/AP+WDS
Operation Mode: Gateway/Bridge/Wireless ISP
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
RF Output Power(Typical):
802.11b: up to 30 ± 1 dBm
802.11g: up to 24 ± 1 dBm
Sensitivity:
-96dBm @ 802.11b
-89dBm @ 802.11g
Antenna: One 12dBi Omni-antenna(SMA connector)
Dimension (mm): 170(L) x 120(W) x 27(H)
Weight: 245g
Operation Temperature: 0°C ~ 60°C ambient temperature
Storage Temperature: -20°C ~ 70°C ambient temperature
Humidity: 10% ~ 90% (Non-condensing)
Connector: One RJ-45 WAN/Four RJ-45 LAN ports/Reset to default button/Power jack
Power requirement:12V DC -
AAP-I2405M/M - 4 Port Modem Router : WLAN Access Point
Features
˙Compliant with ITU-T ADSL, ADSL2 and ADSL2+
˙Compliant with ITU-T G.992.1(G.dmt), G.992.2(G.lite), G.992.3(G.dmt.bis/ADSL2),
G.992.4(G.lite.bis/ADSL2),G.992.5(ADSL2+) and ANSI T1.413 Issue2
˙ADSL2+ compliance raises downward link rate to 24Mbps and upstream rate to 1Mbps
˙Supports Bridging and Routing protocols
˙Supports ATM QoS and IP QoS
˙Auto-PVC detection enabling automatic configuration of VPI/VCI
˙Complies with IEEE 802.11b/g/n of Wireless LAN
Spectifications
ATM:
ATM cells over ADSL/AAL5
Suports up to 8 Virtual Channel Connections
Supports UBR, CBR, rt-VBR and nrt-VBR traffic classes and shaping
Supports RFC2684, RFC1483 , RFC2225 , RFC1577 and
RF2364 payload encapsulations
Supports Dying Gasp(option)
Routing:
RFC 2684/1483 routed PDU encapsulation.
PPPoE, PPP over ATM and IP over ATM
Static route, RIP v1 and RIP v2
DHCP(Dynamic Host Configuration Protocol) server and client
Secondary IP address
IGMPv1/v2/v3 and IGMP proxy
IP QoS
DNS and DDNS
Bridging:
RFC2684/1483 bridged PDU encapsulation
Supports up to 128 MACs learning address
Supports IEEE 802.1d spanning tree
Supports RFC1483 MER
Supports 802.1p/Q
Supports IGMP snooping
Management:
Telnet with CLI(Command line interface) and Web-based GUI
for user configuration and management
Supports SNMP and TR-069(option)
ACL(Access Control List) configuration
UPnP
SNTPv.1/v.2c client for Time Zone update
Firmware upgrade via HTTP
Configuration backup and restore
ARP table provides a list of learned MAC addresses
Storage Humidity: 10% ~ 90% (Non-condensing)
Operation Temperature: Operation: 0°C ~ 60°C
Security/Firewall:
IP/Port filtering
MAC filtering
Port forwarding
URL Blocking
Domain Blocking
DMZ Host
Wireless Features:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
Supports Hide SSID and Multiple BSSID
WMM
WDS
WPS
Access Control , Black list/White list
Wireless: 802.11b: up to 17 ±1 dBm
RF Output Power (Typical):
802.11g: up to 15 ±1 dBm
802.11n: up to 14 ±1 dBm
Interface:
Four 10/100 Base-TX Ethernet ports with RJ-45 connector
Automatic 10/100M speed-sensing and MDI/MDI-X crossover
detection and correction
One pair (2-wire) with RJ-11 connector
Power input: DC 12V/1A
One Reset button
One Power jack
One power ON/OFF switch
One SMA connector -
APG-2405g - Wlan Ap : WLAN Access Point
Features
Ceiling AP
Compact Size, Light Weight
Invisible Cable
Aesthetic Design
Specification
Standards Compliance:
IEEE 802.11b
IEEE 802.11g
IEEE 802.3
IEEE 802.3u
IEEE 802.3af
SDRAM: 16 M Byte
Flash: 4 M Byte
Radio Frequency Type: DSSS / OFDM
Modulation:
IEEE 802.11b: CCK,DQPSK,DBPSK
IEEE 802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band:
America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
Transmission Power:
IEEE 802.11b: 14 dBm@1~11Mbps
IEEE 802.11g: 12 dBm@54Mbps; 13dBm@48Mbps
15dBm@36Mbps; 16dBm@6~24Mbps
Transmission Rate:
IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Access Point Interfaces: Auto MDI/MMDI-X Ethernet 10/100Base-TX: RJ-45
Sensitivity:
IEEE 802.11b: -97dBm @ 1Mbps; -89dBm @ 11Mbps, PER < 8%
IEEE 802.11g: -92dBm @ 6Mbps; -74dBm @ 54Mbps, PER < 10%
Antenna Type: Integrated 4dBi directional embedded antenna (Diversity support)
Security Systems:
64-bit/128-bit/152-bit WEP encryption
Wi-Fi Protected Access (WPA)/ WPA2
Wireless Setting:
Operation Mode–AP/Client/Wireless Bridge (WDS)
Adjustable transmit power by 1dBm step
Operating Environment: Operating Temperature: 0 ~ +50°C
Power:
DC12 Volt ± 5%; 2A(Max.) or DC 48 Volt ± 5%; 0.4A (Max.)
AC adapter AC 100V~240V
Software/Firmware:
Site Survey
DHCP Client
Suppressed SSID
Station Separation
Profile Isolation
Wireless access control by MAC address filter (up to 50)
Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs)
Web-based configuration via popular browser (MS IE, Netscape…)
Windows “Locator” program to help find IP in DHCP client mode
Firmware upgrade and configuration backup via Web or Telnet
Reset to default by WebUI or by Reset button
VPN pass-through (PPTP, L2TP, IPSEC)
SysLog
SNMP v1/v2c
MIB support: MIB I, MIB II (RFC-1213) and Private MIB
Support QoS(WMM)
Support Time settings
Regulatory Approval: FCC Part 15; ETSI 300/328/CE
Network Management System OS Support: Windows 2000/XP Vista Home BASIC
Warranty: One year limited
Standard Accessories
1.Switch Adaptor2.Screw & Plastic wall-pulg
3.(Option) PoE & Power Cord
-
APCI-2405M2 - 802.11 n PCI Card : WLAN Access Point
Features
˙Support advanced 2T3R MIMO Technology with up to 300Mbps data rate
˙Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
˙Support 20MHz and 40MHz bandwidth
˙3 detachable antennas: 2 Tx and 3 Rx
˙Multiple BSSID support
˙Wireless security - 64/128bit WEP, WPA and WPA2
˙QoS enhancement - WMM, WMM-PS
˙Link/Activity LED indicator
˙PCI Interface
Spectifications
Standard: IEEE 802.11b/g/n
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 144Mbps
802.11n(40MHz): up to 300Mbps
Working mode: Infrastructure/Ad-Hoc
Sensitivity:
-95dBm @ 802.11b
-92dBm @ 802.11g
-90dBm @ 802.11n
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
Media Access Control: CSMA/CA
Driver support: Windows 2000, XP 32/64, Vista 32/64, Win7 32/64
RF Output Power(Typical):
802.11b: up to 17 ± 1 dBm
802.11g: up to 14 ± 1 dBm
802.11n: up to 14 ± 1 dBm
Interface: PCI Interface
Antenna: 3 detachable 2dBi antennas (SMA connector)
Operation Voltage: 3.3V
Dimension(mm): 120 (L) x 65 (W) mm(not including blanket & antenna)
Operation Temperature: -10°C ~ 70°C
Storage Temperature: -20°C ~ 70°C
Storage Humidity:10% ~ 90% (Non-condensing) -
AAP-I2405M - MIMO Access Point : WLAN Access Point
Features
˙Support advanced 2 x 2 MIMO Technology with up to 300Mbps downstream and upstream
˙Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
˙Low Noise Amplifier(LNA) support
˙Support 20MHz and 40 MHz bandwidth
˙Operation mode: Gateway, Bridge, Wireless ISP
˙Wireless mode: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙RF output power adjustable
˙Virtual DMZ, Port Forwarding
˙Dynamic DNS
˙TCP/UDP/ICMP/ARP protocol stack
˙Firewall, URL/IP/Port/MAC filtering
˙Wireless users access control
˙Multiple SSID
˙NTP client
˙Wireless security - 64/128bit WEP, WPA TKIP, WPA2 AES, 802.1x
˙Support PPPoE, VPN pass-through(PPTP and L2TP)
˙QoS enhancement - WMM
˙WPS(Wi-Fi Protected Setup) via PIN
˙Easy quick setup wizard with web-based utility
Spectifications
Standard: IEEE 802.11b/g/n
Operation Mode RF:Gateway/Bridge/Wireless ISP
Antenna: Two detachable 2dBi antennas
Frequency Band: 2.400GHz ~ 2.484GHz
Security: 64/128bit WEP; WPA(TKIP with IEEE 802.1x);WPA2(AES with IEEE 802.1x);WPA Mixed
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 144Mbps
802.11n(40MHz): up to 300Mbps
Sensitivity:
-93dBm @ 802.11b
-88dBm @ 802.11g
-87dBm @ 802.11n
RF Output Power(Typical):
802.11b: up to 22 ± 1 dBm
802.11g: up to 16 ± 1 dBm
802.11n: up to 15 ± 1 dBm
Wireless Mode: AP/Client/WDS/AP+WDS
Access Protocol: CSMA/CA
Power requirement: 12V DC
Dimension(mm): 149(L) x 104(W) x 25(H)
Operation Temperature: 0°C ~ 60°C
Storage Humidity: 10% ~ 90% (Non-condensing)
Connector:
Two antennas connector
One RJ-45 WAN port
Four RJ-45 LAN ports
Reset to default button
Power jack
WPS button -
AAP-I2408M - 802.11 n Access Point : WLAN Access Point
Features
˙Support advanced 1 x 1 Technology with up to 150Mbps downstream and upstream
˙Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
˙Low Noise Amplifier(LNA) support
˙Support 20MHz and 40 MHz bandwidth
˙Operation mode: Gateway, Bridge, Wireless ISP
˙Wireless mode: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙RF output power adjustable
˙Virtual DMZ, Port Forwarding
˙Dynamic DNS
˙TCP/UDP/ICMP/ARP protocol stack
˙Firewall, URL/IP/Port/MAC filtering
˙Wireless users access control
˙Multiple SSID
˙NTP client
˙Wireless security - 64/128bit WEP, WPA TKIP, WPA2 AES, 802.1x
˙Support PPPoE, VPN pass-through(PPTP and L2TP)
˙QoS enhancement - WMM
˙WPS(Wi-Fi Protected Setup) via PIN
˙Easy quick setup wizard with web-based utility
˙One detachable antenna
Spectifications
Standard: IEEE 802.11b/g/n
Wireless Mode: AP/Client/WDS/AP+WDS
Operation Mode: Gateway/Bridge/Wireless ISP
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 72Mbps
802.11n(40MHz): up to 150Mbps
Access Protocol: CSMA/CA
Security: 64/128bit WEP; WPA(TKIP with IEEE 802.1x);WPA2(AES with IEEE 802.1x);WPA Mixed
Sensitivity:
-93dBm @ 802.11b
-91dBm @ 802.11g
-89dBm @ 802.11n
RF Output Power(Typical):
802.11b: up to 17 ± 1 dBm
802.11g: up to 15 ± 1 dBm
802.11n: up to 14 ± 1 dBm
Antenna: One 12dBi Omni-antenna
Dimension(mm): 146(L) x 100(W) x 24(H)
Operation Temperature: -20°C ~ 70°C ambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing)
Connector:
One antenna connector
One RJ-45 WAN port
Four RJ-45 LAN ports
Reset to default button
WPS button
Power jack
Power requirement: 12V DC -
AAP-5005P9 - Outdoor Wifi Antenna : WLAN Access Point
Features
˙Complies with 5.8GHz IEEE802.11a
˙Low Noise Amplifier(LNA) support
˙Wireless mode: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙RF output power adjustable
˙Virtual DMZ, Port Forwarding
˙Dynamic DNS
˙TCP/UDP/ICMP/ARP protocol stack
˙Firewall, URL/IP/Port/MAC filtering
˙Wireless users access control
˙Multiple SSID
˙Wireless security - 64/128bit WEP, WPA TKIP, WPA2 AES, 802.1x
˙QoS enhancement - WMM
˙Ralink Solution
Spectifications
Standard: IEEE 802.11a
Frequency Band: 4.900GHz ~ 5.850GHz
Data Rate: 802.11a: up to 54Mbps
Number of operation: 5.745GHz-CH149
Channel:
5.765GHz-CH153
5.785GHz-CH157
5.805GHz-CH161
5.825GHz-CH165
Wireless Mode: AP/Client/WDS+AP/WDS
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPA Mixed
Media Access Control: CSMA/CA
Sensitivity: -90dBm @ 54Mbps
Output Power(Typical): 802.11a: up to 27 ± 1 dBm
Antenna Type: 9dBi Panel Antenna
Dimension(mm): 225(L) x 80(W) x 71(H)
Storage Humidity: 10% ~ 90% (Non-condensing
Operation Temperature: Operation: 0°C ~ 60°C
Connector:
One RJ-45 LAN port with PoE passive
Reset to default button
Power requirement: 12V DC -
APE-5003 - Outdoor Access Point : WLAN Access Point
Spectifications
Standards: IEEE 802.11a, IEEE 802.3, IEEE 802.1x
CPU: Atheros AR2313A
Flash: 8MB
RAM: 32MB
Interface:
1* RJ45 PoE LAN Port
1* RJ45 WAN Port
Antenna: 5GHz High-Gain 14dBi Antenna
Output Power: 802.11a: 500mW
Sensitivity: 802.11a: -94dBm @6Mbps; -74dBm @54Mbps
Security: 64/128-bit WEP, WPA(TKIP with IEEE 802.1x), WPA2, AES
Operation Mode: AP/Client/WISP / WDS Bridge
Date rate:
802.11b: 1, 2, 5.5 and 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
Channel:
802.11a
5.15~5.25GHz (lower band for US, Canada, Japan)
5.25~5.35GHz (middle band for US, Canada)
5.725~5.825GHz (upper band for US, Canada)
5.50~5.70GHz (for Europe)
Software:
Site Survey with RSSI Signal Survey
Bandwidth Control
SNMP v1/v2 support
Support adjustable output power
Distance Adjustment
WEP over WDS support
Radius Supported
Mounting: Pole Mount
Size: 230 * 230 * 75mm
Weight: 1.3kg
Power Required: PoE 18V, 1A
ApplicationsAccessory
1.Mast mounting holder
2.Mast Bracket Kits
3.18V / 1A Power Adapter
4.APOE02-WM PoE Adapter
-
AAM-2410USB - Wlan USB Adapter : WLAN Access Point
Features
˙Complies IEEE 802.11n/b/g standard
˙IP67 enclosure for outdoor use
˙Support 150 Mbps data rate
˙High output power solution provides you larger wireless range and enhance mobility of usage
˙Complies with Universal Serial Bus Rev. 1.0, 1.1 and 2.0 specifications and UPnP
˙Support 64/128-bit WEP encryption, advanced WPA/WPA2 AES/TKIP and WPS for WLAN security
˙Support 20/40 MHz Bandwidth in AP mode
˙Support SoftAP function -allows user to create AP function at your laptop
˙Low power with advanced power management
˙Support driver for Windows 2000, XP 32/64 and Vista 32/64,Apple Mac and Linux
˙Support s auto-installation and diagnostic utilities
˙USB 2.0 with 5m cable
Specifications
Standards Compliance:
IEEE 802.11b/g
802.11 draft n 2.0
USB 2.0
Chipsets Solution: RT3070L
Modulation:
IEEE802.11b: CCK,DQPSK,DBPSK
IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
IEEE802.11n draft 2.0
Frequency Band:
America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
Japan: 2.412~2.484 GHz (14 channels)
Transmission Power: 20~30dBm (100mW~1W) adjustable
Transmission Rate:
IEEE802.11b: 1/2/5.5/11 Mbps
IEEE802.11g: 6/9/12/18/24/36/48/54 Mbps
IEEE802.11n draft 2.0: 150 Mbps
Access Protocol: CSMA/CA
Sensitivity:
-91dBm @ 11Mbps, PER < 8% packet size 1024; -76dBm @ 54Mbps,
PER < 10% packet size 1024; -76±2dBm @ 65Mbps: 802.11n
(20MHz); -74±2dBm @ 135Mbps: 802.11n(40MHz)
Frequency Stability: With ±10ppm
Antenna Type: External 7dBi Dipole Antenna (Optional)
Security Systems:
64/128-bit WEP,WPA-PSK,WPA2-PSK,802.1X and Cisco CCX
support WPS PIN/PBC
USB: USB 2.0 with 5m cable
Temperature: 32~122°F (0 ~50°C)
Network Management System OS Support: Windows 2000/XP32-64/Vista32-64/Macintosh/Linux
Warranty: One year limited
Standard Accessories -
AAP-2406P9USB - 802.11 Wireless USB Adapter : WLAN Access Point
Features
˙Support advanced 1 x 1 MIMO Technology with up to 150Mbps downstream data rate
˙Low Noise Amplifier(LNA) support
˙Complies with 2.4GHz IEEE802.11n Draft 2.0 and IEEE802.11g/b standards
˙Support 20Mbps and 40Mbps bandwidth
˙Multiple BSSID support
˙Wireless security - 64/128bit WEP, WPA and WPA2
˙QoS enhancement - WMM
˙USB 2.0 Interface
Spectifications
Standards:
IEEE 802.11n Draft 2.0
IEEE 802.11g/b
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11n(40MHz): up to 150Mbps
802.11n(20MHz): up to 72Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
Number of operation channel:
2.412~2.462GHz (Canada, FCC) / 11 Channels
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
Sensitivity:
-89dBm @ 802.11n
-91dBm @ 802.11g
-93dBm @ 802.11b
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPA Mixed
Access Protocol: CSMA/CA
Driver support: Windows® 2000, XP 32/64, Vista 32/64
RF Output Power(Typical):
802.11b: up to 28 ± 1 dBm
802.11b: up to 24 ± 1 dBm
802.11b: up to 22 ± 1 dBm
Interface: Mini-USB
Antenna: 9dbi Panel Antenna
Operatiom Voltage: 5V
Dimension(mm): 225(L) x 80(W) x 71(H)
Operation Temperature: 0°C ~ 60°C
Storage Temperature: -20°C ~ 70°C ambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing) -
AAP-2406P9 - Wireless AP Router : WLAN Access Point
Features
˙Support advanced 1 x 1 MIMO Technology with up to 150Mbps downstream and upstream
˙Realtek RTL8196B
˙Complies with 2.4GHz IEEE802.11n Draft 2.0 and IEEE802.11g/b standards
˙Low Noise Amplifier(LNA) support
˙Support 20Mbps and 40Mbps bandwidth
˙Operation mode: Gateway, Bridge, Wireless ISP
˙Wireless mode: AP, Client, WDS, AP+WDS
˙DHCP Server/Client
˙RF output power adjustable
˙Virtual DMZ, Port Forwarding
˙Dynamic DNS
˙TCP/UDP/ICMP/ARP protocol stack
˙Firewall, URL/IP/Port/MAC filtering
˙Wireless users access control
˙Multiple SSID
˙NTP client
˙Wireless security - 64/128bit WEP, WPA TKIP, WPA2 AE2, 802.1x
˙Support PPPoE, VPN pass-through(PPTP and L2TP)
˙QoS enhancement - WMM
˙Support Microsoft LLTD(Link Layer Topology Discovery) protocol
˙Support Microsoft Vista Basic logo for wireless router
Specifications
Standards:
IEEE 802.11n Draft 2.0
IEEE 802.11g/b
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11n(40MHz): up to 150Mbps
802.11n(20MHz): up to 72Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
Number of operation channel:
U.S. 1-11
Japan 1-13,14
EETSI 1-13
Wireless Mode: AP/Client/WDS, AP/WDS
Sensitivity:
-89dBm @ 802.11n
-91dBm @ 802.11g
-93dBm @ 802.11b
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPA Mixed
Access Protocol: CSMA/CA
Power requirement: DC12V/1A
Operation Mode RF:
Gateway
Bridge
Wireless ISP
Output Power(Typical):
802.11b: up to 28 ± 1 dBm
802.11g: up to 26 ± 1 dBm
802.11n: up to 24 ± 1 dBm
Antenna: 9dbi Panel Antenna
Dimension(mm): 225(L) x 80(W) x 71(H)
Operation Temperature: 0°C ~ 60°C
Storage Humidity: 10% ~ 90% (Non-condensing)
Connector:
One RJ-45 port for WAN
One RJ-45 LAN ports
Reset to default button -
NLOS - Wireless Network Bridge : WLAN Access Point
APM Wireless Broadband product line are adopting Wireless TDMA concept to provide an affordable and reliable rural connectivity. All of products are high-performance outdoor-deployable wireless bridge that provides wireless connectivity between multiple networklocations. With the high throughput and long-distance transmission, itis the appropriate backhaul solution for Carriers, Service Providers and Enterprises.
Key Features & Benefits
˙Reliable Outdoor Enclosure
˙IP67 Qualified
˙Waterproof
˙Vent design
˙Good Balance on low Cost and High Performance
˙Actual reachable testing range > 50 km
˙High throughput
˙Support point to point , point to multi point and Relay functions
˙Ready for Next Generation Technology
˙Software Features‧High security (AES)
˙Ease of Installation (Real time Link Test for Local and Remote RSSI)
˙Transmit Power Control
˙Bandwidth Control (40 / 20 / 10 / 5 MHz)
˙Wireless TDMA (TDD Mode)
˙VLAN Support
Hardware
Memory: 16MB Flash + 32MB SDRAM
LAN: 1 x 10/100BaseT RJ-45 with Auto-MDIX
Power Over Ethernet (PoE): Yes (802.3af)
Default Button: Yes
Enclosure: Metal Case, IP 67 Verified
Lighting Protect: From Ethernet and Antenna (N Connector Model Only)
Feature
Operating Mode: Bridge (PTP)
Link Test Tool: Yes (Real Time Local and Remote RSSI)
Radio Bandwidth: 5 / 10 / 20 / 40 Mbps
TDMA: Yrs
Link aggregation: Yes (For Dual RF Model, R2)
TDMCoordination: Yes
Channel Selection: Yes
DFS/TPC: Yes
Spanning Tree (STP): Yes
VLAN: Yes (802.1Q)Spanning Tree (STP)
Space In Meters: Yes (Auto)
NTP Client: Yes
CLI: Yes (SSH)
Backup / Restore: Yes
System Log: Yes
Remote Log Server: Yes
Security
Encryption: AES
Management
Web Base Management: Yes
SNMP V.2: Private MIB, 802.11 MIB
Windows Tool: Yes (Layer 2, Coming Soon)
Physical
Operating Temperature: -30 ~ 80C
Operating Humidity: 10 ~ 95% RH
Performance Test Reference
LOS
NLOS -
AUSB-2405M - 802.11 n USB Adapter : WLAN Access Point
Features
˙Support advanced 2 x 2 MIMO Technology with up to 300Mbps downstream data rate
˙Low Noise Amplifier(LNA) support
˙Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
˙Support 20MHz and 40MHz bandwidth
˙Multiple BSSID support
˙Wireless security - 64/128bit WEP, WPA and WPA
˙QoS enhancement - WMM
˙Link/Activity LED indicator
˙USB 2.0 Interface
Spectifications
Standard: IEEE 802.11b/g/n
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11n(20MHz): up to 72/144Mbps
802.11n(40MHz): up to 150/300Mbps
Working mode: Infrastructure/Ad-Hoc
Sensitivity:
-95dBm @ 802.11b
-92dBm @ 802.11g
-90dBm @ 802.11n
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPA Mixed
Media Access Control: CSMA/CA
Driver support: Windows 2000, XP 32/64, Vista 32/64, Win7 32/64
RF Output Power(Typical):
802.11b: up to 27 ± 1 dBm
802.11g: up to 22 ± 1 dBm
802.11n: up to 21 ± 1 dBm
Interface: Mini-USB
Antenna: 5dBi Omni-antenna x 2
Operation Voltage: 5V DC
Dimension(mm): 88(L) x 56(W) x18 (H)
Operation Temperature: 0°C ~ 60°C
Storage Temperature: -20°C ~ 70°C ambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing) -
AUSB-2410 - 802.11 b USB Adapter : WLAN Access Point
Features
˙IEEE 802.11b/g standard
˙54Mbps high data-rate and 1W high output power
˙USB 2.0 Interface
˙Supports 64/128-bit WEP encryption, advanced WPA/WPA2/802.1x for WLAN security
˙Support Soft AP function - allows user to create AP function at your computer
˙Replaceable antenna – user can change to higher-gain antenna
Spectifications
Standard: IEEE 802.11b/g
Frequency Band: 2.400GHz ~ 2.484GHz
Data Rate:
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
Media Access Control: CSMA/CA
Interface: Mini USB
Working mode: Infrastructure/Ad-Hoc
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
RF Output Power(Typical):
802.11b: up to 30 ± 1 dBm
802.11g: up to 24 ± 1 dBm
Sensitivity:
-96dBm @ 802.11b
-92dBm @ 802.11g
Antenna: One detachable 5dbi antenna(SMAconnector)
Dimension (mm): 99 (L) x 60 (W) x 16 (H) (not including antenna)
Operation Temperature: 0°C ~ 60°C ambient temperature
Storage Temperature: -20°C ~ 70°C ambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing)
Driver support: Windows 2000, XP 32/64, Vista 32/64, Win7 32/64
Operation Voltage: 5V DC -
AUSB-502401M - 802.11 g USB Adapter : WLAN Access Point
Features
˙Support advanced 2 x 2 MIMO Technology with up to 300Mbps PHY rate for both Transmitting and Receiving.
˙Complies with 2.4GHz IEEE802.11b/g/n and 5GHz IEEE802.11a standards
˙Support 20MHz and 40MHz bandwidth
˙Wireless security - 64/128bit WEP, WPA and WPA2
˙QoS enhancement – WMM, WMM-PS
˙Link/Activity LED indicator
˙USB 2.0 Interface
Spectifications
Standard: IEEE 802.11a/b/g/n
Frequency Band:
2.400GHz ~ 2.484GHz
4.900GHz ~ 5.800GHz
Data Rate:
802.11a/g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11n(20MHz): up to 72/144Mbps
802.11n(40MHz): up to 150/300Mbps
Number of operation: 2.412~2.462GHz (Canada, FCC) / 11 Channels
Channel:
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
5.180G~5.825GHz
CH36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,
136,140,149,153,157,161,165
Sensitivity:
-91dBm @ 802.11a
-94dBm @ 802.11b
-73dBm @ 802.11g
-72dBm @ 802.11n
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
Operation Voltage: 5V DC
RF Output Power(Typical):
802.11a: up to 13 ± 1 dBm
802.11b: up to 22 ± 1 dBm
802.11g: up to 16 ± 1 dBm
802.11n: up to 20 ± 1 dBm
Interface: Mini-USB
Antenna Type: 2 x detachable 2dBi antennas (SMA connector)
Driver support:
Windows 2000, XP 32/64, Vista 32/64, Win7 32/64
Linux
Macintosh
Dimension(mm): 88(L) x 56(W) x18 (H)
Operation Temperature: Operation: 0°C ~ 60°C
Storage Temperature -20°C ~ 70°C ambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing) -
AUSB-502401M - USB 802.11 g Adapter : WLAN Access Point
Features
˙Support advanced 2 x 2 MIMO Technology with up to 300Mbps PHY rate for both Transmitting and Receiving
˙Complies with 2.4GHz IEEE802.11b/g/n and 5GHz IEEE802.11a standards
˙Support 20MHz and 40MHz bandwidth
˙Wireless security - 64/128bit WEP, WPA and WPA2
˙QoS enhancement – WMM, WMM-PS
˙Link/Activity LED indicator
˙USB 2.0 Interface
Spectifications
Standard: IEEE 802.11a/b/g/n
Frequency Band:
2.400GHz ~ 2.484GHz
4.900GHz ~ 5.800GHz
Data Rate:
802.11a/g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11n(20MHz): up to 72/144Mbps
802.11n(40MHz): up to 150/300Mbps
Number of operation: 2.412~2.462GHz (Canada, FCC) / 11 Channels
Channel:
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
5.180G~5.825GHz
CH36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165
Sensitivity:
-91dBm @ 802.11a
-94dBm @ 802.11b
-73dBm @ 802.11g
-72dBm @ 802.11n
Security:
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
Operation Voltage: 5V DC
RF Output Power(Typical):
802.11a: up to 13 ± 1 dBm
802.11b: up to 22 ± 1 dBm
802.11g: up to 16 ± 1 dBm
802.11n: up to 20 ± 1 dBm
Interface: Mini-USB
Antenna Type: 2 x detachable 2dBi antennas (SMA connector)
Driver support:
Windows 2000, XP 32/64, Vista 32/64, Win7 32/64
Linux
Macintosh
Dimension(mm): 88(L) x 56(W) x18 (H)
Operation Temperature: Operation: 0°C ~ 60°C
Storage Temperature: -20°C ~ 70°C ambient temperature
Storage Humidity: 10% ~ 90% (Non-condensing)
Our expertise has enable us to ensure finest
